Latest listing changes: May 5, 2008
 

FOR SALE:
Elliott Bay 23-foot hull and Stuart 6A compound. This is a project begun by NWSS member, the late Dr. Tim Cronin. The engine is complete, except for pumps, and hull has stern gear installed. Hull colors are tan decks, white topsides, dark green bottomsides. Additional photos HERE
 
Hull, $12,500
Engine $9,500
Contact:
    Pat Spurlock
    phone: 503-775-5954
    email steam@steamlaunch.com

FOR SALE:
Norwegian lifeboat hull of fiberglass.
Hull was extended and is now 23' and beam 7+'. Propeller opening for a 22" wheel. Hull is fiberglass, originally built to Lloyd's specs as a lifeboat. "Double Hull" meaning the interior is all fiberglass, continuous with the exterior, formed as longitudinal benches nearly full length, with engine well along centerline. Well is about 2 ft. wide, and runs nearly full length, terminating at bow and stern bulkheads. There are short decks at bow and stern, with WT bulheads below them. Photos HERE and HERE. Boat is on wooden cradle. No trailer. Owner may be willing to sell 22" x 34" propeller and other items icluding some canopy hardware.
 
$ 3,000.
Contact:
    Wilfried at Floscan
    3016 NE Blakeley St
    Seattle, WA 98105
    phone: 206-524-6625

FOR SALE:
New Steam Boat wants new owner.
Professionally built and engineered, this really pretty 18' steamer was launched last year and has had minimal steaming since then. Vertical wet firebox fire tube coal fired boiler 80 - 100psi wp. 2.5" x 3" single with air and feed pumps driven off rockers from crosshead. Keel condenser. Tiller steering. Copper hotwell and reserve feedwater tank. Penberthy injector, whistle etc. Speedy little boat. Visit HERE for fuller details.
 
Seeking offers on NZD $42,500.
Contact:
    Russ Ward
    49a Beresford St.
    Auckland 0622
    New Zealand
    phone: 6494457088
    email: mrward@steam.co.nz

FOR SALE:
24'LOA, 24' LWL, 8' beam, 1.9' draft double-ended aluminum lifeboat hull. Originally designed to carry 68 persons, she has seating to comfortably accom-
modate 8 with generous space for a steam plant. The hull is in excellent condition and fitted with a 1.25" prop shaft and 3 blade bronze 17"D x 18"P propeller. Water and fuel tanks are installed. A probably undersized (12? sq.ft.) boiler and jet condenser are included. No engine is included. More photos. Additional information HERE
Trailer is included.
 
$ 1,800.00 or best offer
Contact:
    Dan Martin, 425-259-3117
    Bob Dessert, 425-418-7055

FOR SALE:
Engine: Stuart 6A copy, hardly used, ready to run.
Boiler 45 sq. ft., vertical fire tube, professionally welded, new condition, complete with all fittings. PHOTO
 
$ 9,000.00 or best offer
Contact:
    Andrew VanLuenen
    425-239-1403

FOR SALE:
 
"Grasshopper" steam carriage built in 1984 by semi-famous Vancouver small scale steam train machinist Walt Humes. The carriage is chain-driven from a horizontal 2-cyl steam engine that is a one-off. Humes made his own castings (engine patterns included in sale) throughout. The engine was made as a half-scale of a 10-HP Stanley engine. The valves are piston valves. The boiler is a monotube blackpipe boiler.
 
There is a lot of detail with this steam carriage and you will be impressed.
 
Web Links: http://www.pcez.com/~artemis/NWSSALoco-t.htm
http://home.comcast.net/~matwete/nwsaca/HotFogTourRecap.htm
Located in Portland, OR  
Price: $ 10,500 obo
 
Contact:
 
http://www.pcez.com/~artemis/NWSSALoco-t.htm

FOR SALE:
1900 Locomobile reproduction with original engine and axles.
Location: Spokane, Wa.
Asking Price: $35,000.
 
Contact:
    Jim McCall
    Email: mccall@reiffmolding.com
    Tel: 509-893-1768

FOR SALE:
16 foot double ended ( walnut shape-canoe stern ) strip built wooden boat. Broad and stable, a good 8 + feet. Set up as a sailboat ( gaff rigged ) with a 5 horse gas inboard. Could be made into a pretty steamer if someone loved it a lot. Brightwork isn't bright anymore. Lots of people saw her on the trailer in St. Helens, so ask for opinions. I'm not saying there isn't work there, but there's something that put a twinkle in a few eyes. Includes a Caulkins trailer. Clear titles for both ( Boat - Oregon + 2007 registration, trailer - Washington, both in my name ). Additional views: BOW, STARBOARD, STERN.
$3,000 for all, or try to sweet talk me.

WANTED:
Small hull for steam conversion. Must be sound, traditional looking and have clearance for the usual oversized prop. My plant is 10 sq ft water tube with a 2 X 21/2 engine. It came out of a 12 ft boat and won't push much more than that.
I'm in Nanaimo BC, on Vancouver Island. Importing a used boat into Canada isn't a problem but a trailer can be. To import a trailer you need proof that it was commercially built.
Contact:
    Bill Jackson
    Tel: 250-751-1932
    Email: wejackson@shaw.ca

FOR SALE: FIBERGLASS STEAMBOAT HULLS. 22' long x 6' beam. This is the same hull used to create the Ken Ross and Pastimes. $ 3,700. Order direct from:
    J. T. Fiberglass
    1050 W. Smith Rd., Bellingham, WA 98226
    Telephone: 360-384-6732

You may now contact Fidalgo Enterprises by email at: steam.boat@verizon.net

Latest page update: May 5, 2008

RULES   REGARDING   ADVERTISEMENTS - effective April 8, 2003:
There is no charge for ads and, if you meet the following requirements, I will guarantee placement of your ad:
  1. You must be a member of the Northwest Steam Society;
  2. The item(s) for sale must be related to live steam;
  3. If it is a personal ad, the item(s) must be owned and/or sponsored by a NWSS member;
  4. If it is a business ad, I will only post it if you do not have a website;
  5. You must include a S.A.S.E. if you want hard copy returned;
  6. Ads will only be posted for six (6) months. You then must renew;
  7. All decisions of the Webmaster are final!
To place an ad email the Webmaster .
 
The Northwest Steam Society makes no guarantee that the information contained in any ad is correct. Caveat emptor!