NT Setup Instructions

pcezlogo.gif (2747 bytes)
PCEZ.com - Internet Services

Below you will find instructions on how to setup your Windows NT system.

Step 1: Double click My Computer-> Dial-Up Networking

dun0.jpg (18129 bytes)

Step 2: Create a Phonebook Entry for PCEZ. Input your local dial-up Access number. dun1.jpg
(20647 bytes)

Step 3: Click More -> Edit entry and modem properties

dun2.jpg (23256 bytes)

Step 4: On the Basic tab - it should show PCEZ, the phone number and modem.

dun3.jpg (17380 bytes)

Step 5: On the Server tab - only TCP/IP and Enable software compression - should be marked. Click on the TCP/IP Settings button.

dun4.jpg (17632 bytes)

Step 6: "Server assigned IP address" and "Specify name server addresses" - should be selected.

In the Primary DNS type 209.102.124.11

In the Secondary DNS type 209.102.124.10

Use IP header compression and Use default gateway on remote network both need to be checked.

Click OK

dun4a.jpg (27058 bytes)

Step 7: On the Script tab - None - should be selected.

dun5.jpg (14873 bytes)

Step 8: On the Security tab - Accept any authentication including clear text - should be selected.

dun6.jpg (17774 bytes)

Step 9: On the X.25 tab - None - should be selected.

Click OK.

dun7.jpg (17204 bytes)

Step 10: Double click My Computer -> Control Panel -> Network. net0.jpg (36335 bytes)

Step 11: On the Protocol tab - select TCP/IP. Click Properties.

net1.jpg (22534 bytes)

Step 12: The IP address tab should be marked Obtain an IP from a DHCP server.

tcp1.jpg (23219 bytes)

Step 13: The DNS tab needs to have a Host Name.

tcp2.jpg (21873 bytes)

Step 14: The Routing tab should NOT have anything marked.

Click OK and then OK again. Your computer may want to reboot. Go ahead and do this.

tcp4.jpg (16855 bytes)

You are all set to use your new Phone book entry!