How to Switch to 10 Digit Dialing

The new 10 digit dialing in Oregon does not effect our DSL customers or customers in Clatsop and Tillamook Counties.

You will need to print these instructions and then disconnect from PCEZ before setting up the 10 digit dialing on your computer.

	Open your Trumpet Winsock. Click on Dialler, then setup.cmd

	Enter the dialup number with area code (e.g 503-639-9846) Click OK until you are back to the main screen for your Trumpet Winsock. Your 3.x machine is now ready for 10 digit dialing.

	Double click My computer-> Dial-up Networking -> then right click on your PCEZ icon, click Properties. This is the screen you will see.

	Please add the Area Code before the number so that it looks like this. Click OK and close all the open windows. Your Windows 95 machine is now ready for 10 Digit Dialing.

	Go to Start-> Setting -> Control Panel and then the Modems icon. Click on the Dialing Properties.

	Click on the Area Code Rules.

	Put a check mark in "Always dial the area code" in the top section. Click OK, this will take you back to the previous screen. Click Apply and then OK. You are now setup to use 10 Digit Dialing.

	Double click My Computer then Phone and Modem Options.

	If your area code is 503 this is the screen you will see. Select your location and click Edit

	If your area code is 971 this is the screen you will see. Select your location and click Edit

	Select the Area Code Rules tab. Click New

	Type in the Area Code 503, select "Include all prefixes within this area code" Check mark the "Include the area code" box. Click OK until you are back to the Control Panel. Close the Control Panel. You are now setup for 10 Digit Dialing

	Click Start -> Programs -> Accessories -> Dial-Up Networking. Select your PCEZ phonebook entry. Click More -> Edit entry and modem properties.

	This is the screen you will see.

	In front of your dial-up number add your Area Code. Click OK and you are now ready to use 10 digit dialing.